COLOR CCD CAMERA
User Guide
32
COLOR CCD CAMERA
User Guide
33
Troubleshooting
If there are problems in operation, please refer to the items below. If the
problem persists, please contact the agent you purchased this product from.
•
Nothing appears on the screen.
▶
Check that the power cord and line connection between the camera and monitor are
fixed properly.
▶
Check that you have properly connected UTP cable or BNC cable to the camera.
•
The image on the screen is dim.
▶
Is lens stained with dirt? Clean your lens with soft, clean cloth.
▶
Set the monitor to proper condition.
▶
If the camera is exposed to too strong light, change the camera position.
•
The image on the screen is dark.
▶
Adjust the contrast feature of the monitor.
▶
If you have an intermediate device, set the 75Ω / Hi-z properly.
•
The camera is not working properly, and the surface of the camera is hot.
▶
Check that you have properly connected the camera to an appropriate power source.
•
The SENS-UP function does not work.
▶
Check that AGC of EXPOSURE SETUP menu is ‘OFF’.
▶
Check that SHUTTER of EXPOSURE SETUP menu is ‘A.FLK’ or ‘MANUAL’.
•
The Motion Detection function does not work.
▶
Check that MOTION DET of SPECIAL SETUP menu is ‘OFF’.
•
Color is not correct.
▶
Check the setting of WHITE BAL SETUP menu.
•
The screen flickers continually.
▶
Check that direction of camera turns toward the Sun.
•
When coaxial communication is not available:
▶
Make sure that the camera and monitor are installed within the recommended distance.
▶
Use the video amplifier equivalent to coaxitron if the recommended installation distance is
exceeded.
•
IR-LED isn’t lighted.
▶
Isn’t DAYNIGHT function setting up the color mode?
▶
Please change the AUTO or B/W mode.
•
The camera is not waterproof.
▶
Please check the Front Cover and Main Body by the following Guide Label.
Specifications
※
The specification for this product may change without prior notice for product improvement.
SCO-2080RN
SCO-2080RP
ELECTRICAL
Input Voltage
DC 12V ± 10% / AC 24V ± 10%
Power Consumption
Max 6.8W / 6.5W (IR-LED ON)
VIDEO
Imaging Device
1/3 inch, Diagonal 6mm Super HAD CCD
Total Pixels
811(H) x 508(V)
795(H) x 596(V)
Effective Pixels
768(H) x 494(V)
752(H) x 582(V)
Scanning System
2:1 Interlace
Synchronization
Internal /Line-Lock
Frequency
H : 15.734KHz V:59.94Hz
H: 15.625KHz V: 50.00Hz
Horizontal Resolution
COLOR : 600TV line, B/W : 700TV line
Min. Illumination
LED ON : 0Lux
LED OFF : 0.15Lux (Color, F1.2), 0.0003Lux (Color,SENS-UP x512)
Visibility distanse(IR LED)
50m (32EA)
S/N (Y Signal)
52dB (Weight On, AGC Off)
Video Output
CVBS : 1.0Vp-p, 75Ω composite
LENS
Zoom Ratio
3.6x (Manual)
Focus Length
2.8 ~ 10.0mm (F1.2)
Angular Field of View
H : 94.4°(Wide) ~ 28°(Tele) / V : 69.2°(Wide) ~ 21°(Tele)
OPERATIONAL
Electronic Shutter Speed
1/60 ~ 1/120k sec
1/50 ~ 1/120k sec
On Screen Display
NTSC : 7 Languages, PAL : 15 Languages
SSDR
On / Off (Level adjustable)
Backlight Compensation
BLC / HLC / OFF
Day & Night
COLOR / B/W / AUTO (ICR)
Gain Control
Low / High / Off
White Balance
ATW / Outdoor / Indoor / Manual / AWC (1,700°K ~ 11,000°K)
SENS-UP (frame Integration)
Auto / Off (Selectable x2 ~ x512)
Motion Detection
On / Off (8 Programmable zones)
Privacy Masking
On / Off (12 Programmable zones)
3D Noise Filter (SSNRIII)
On / Off (Level adjustable)
Digital Zoom
On / Off (x1 ~ x16)
Digital Image Stabilization(DIS)
On / Off
Camera Title
On / Off (Displayed 15 Characters)
Sharpness
On / Off (Level adjustable)
Flip / Mirror
On / Off
Communication
Coaxial, RS-485
Protocol
Coaxial(Pelco), RS-485(SAMSUNG-T, SAMSUNG-E, PELCO-P, PELCO-D, VICON,
PANASONIC, BOSCH, HONEYWELL)
ENVIRONMENTAL
Operating Temperature / Humidity
-10°C ~ +55°C / Less than 90% RH
MECHANICAL
Water Resistance
IP66
Dimension
Ø77mm(W) x 216mm(H) (BRACKET ANGLE 90°), 284mm (BRACKET ANGLE 180°)
Weight
1Kg
