Call functions
32
2. Press
to insert a pause. A “P” displays,
meaning that a hard pause will occur at that
point in the dialing sequence.
The “P” stops the dialing and waits for the
teleservice to prompt you for a number. The
number following the “P” is your account
number, PIN, etc.
3. Enter the digits that need to follow the pause,
such as your account number.
4. Repeat steps 2 and 3 to add more pauses and
numbers, if necessary.
5. Store the number in your Phonebook as you
normally would by pressing
.
6. Select an icon to identify the category in which
the number is to be stored.
To select the category, press the Left or Right
key and press
.
7. Follow the procedure from step 1 on page 59.
Pause dialing from a stored Phonebook entry
1. Dial the number from Phonebook.
2. Wait for the appropriate prompt from the
number you are calling.
3. When prompted, press
to send the DTMF
(Dual Tone Multi-Frequency) number that
follows your pause.
“Send DTMF” flashes on the display and the
transmitted tone sounds.
Call functions
33
Manual pause dialing
You can enter pauses manually during the dialing
process.
1. Enter the phone number of the service you want
to call, such as a bank’s teleservice phone
number.
2. Press
to insert a pause.
The screen displays a “P” indicating a pause.
3. Enter the number to be sent after the pause by
pressing the digit keys.
4. Repeat steps 2 and 3 to add more pauses and
numbers, if necessary,
5. Press .
6. After connecting, wait for the prompt from
teleservice. Press
again after the prompt to
send the additional number(s).
