Understanding Your Contacts 66
Note:
The
Contacts
command does not dial phone numbers for a Contact.
To look up information for a specific Contact:
1.
In Standby mode, tap
Menu
➔
Voice Commands
. “
Say a
Command
” displays on the screen and plays through the
speaker.
2.
Say “
Contacts
”.
Voice Service prompts you to “
Say the name
.”
3.
Speak clearly and say the full name of the person you want to
call, exactly as it is entered in your Contacts list.
•
If Voice Service recognizes the name you said, the contact information
displays on the screen.
•
If Voice Service does not recognize the name you said, a choice list of up
to three names displays on the screen, and Voice Service prompts you
with “
Try again?
” followed by the first name on the list.
4.
Say “
Yes
” to confirm the name or “
No
” to hear the next name,
or use the keypad to select the correct name from the list. (For
more information, refer to
“Confirm Choices”
on page 130.)
•
To say the name again, tap
Repeat
.
5.
The contact information for the name you selected displays on
the screen.
•
Tap
for the following options:
–
Set Speed Dial
: Assign a Speed Dial number to this Contact.