Samsung SCH-N392, User Manual

Page: 11 / 69

19
G Ge ettttiin ng g S Stta arrtte ed d
18
G Ge ettttiin ng g S Stta arrtte ed d
Switching the Phone On/Off
Hold down for more than one second to switch the
phone on.
The service light on the middle of the phone flashes,
and an alert sounds. When the system locates services,
the greeting message displays along with the date and
time.You can now place and receive calls.
If the phone is out of service, the icon appears in
the display. In this case, you cannot make and receive
calls. You can try again later when service is available.
Note : You can change the LCD display language. To
change the language, use the Language menu option
( MENU 7-3 ); for further details, refer to page 89.
When you wish to switch the phone off, hold down
for more than two seconds.
Note : If you want to switch the phone off in key guard
mode, unlock the phone first by pressing and .
Your Phone’s Modes
Standby Mode
Standby is the most basic state of your phone. The
phone goes into Standby mode soon after you turn it on,
or whenever you briefly press . When your phone is
in Standby mode, you will typically see the greeting
message and current date and time.
If you enter a phone number, you can press to dial
it, or press to save it in the internal phone book.
Press
at any time to return to Standby mode. Be
careful; if you are on a call when you press , you
will return to Standby mode, but it also disconnects the
call.
The Main Menu is accessed when you are in Standby
mode.
Power Save Mode
Your phone comes with a Power Save feature that will
automatically be activated if your phone is unable to
find a signal after 15 minutes of searching. While this
feature is active, the phone’s battery charge will
conserved. The phone will automatically recheck for a
signal periodically. To manually force the phone to
recheck for a signal, press any key.
Key Lock Mode
You can lock the keypad by pressing and holding in
Standby mode. By doing this, you can prevent accidental
key pressing.
To unlock the keypad, press and then .
When you have an incoming call or an alarm occurs in
Key Lock mode, the mode is automatically deactivated
and the phone goes to Standby mode.
Note : You can set the phone to automatically lock the
keypad after a specified period of time, in the Auto Key
Lock menu (Menu 9-3) . See page 94.