Samsung SCH-a645 Series, User Manual

Page: 80 / 220

80
Section 6
Finding a Contacts Entry
Voice Method
Use the VoiceSignal Contacts command to view contact
information for any named contact stored in your
Contacts list by saying the name.
Note: The Contacts command shows the requested contact information in
the display but does not dial any phone numbers for the contact.
To look up information for a specific contact:
1. In standby mode, press the Voice Recognition key ( )
to launch VoiceSignal .
“ Say a Command ” appears in the display and is
pronounced through the speaker.
2. Say “ Contacts ”.
VoiceSignal prompts you to “ Say the name. ”
3. Speak clearly and say the full name of the person you
want to call, exactly as it is entered in your contact list.
䢇
If VoiceSignal recognizes the name you said, the contact
information for that name appears in the display.
䢇
If VoiceSignal does not recognize the name you said, a choice
list of up to three names appears in the display, and
VoiceSignal prompts you with “
Did you say? ” followed by the
first name on the list.
4. Say “ Yes ” to confirm the name or “ No ” to hear the next
name, or use the keypad to select the correct name from
the list. (See “Choice Lists Settings” on page 149, for
more information.)
䢇
To say the name again, press the Repeat (right) soft ( ) key.