33
C
Ca
al
ll
l
F
Fu
un
nc
ct
ti
io
on
ns
s
32
C
Ca
al
ll
l
F
Fu
un
nc
ct
ti
io
on
ns
s
Pause Dialing from a Stored Phonebook Entry
1. Dial the number of the service from Phonebook.
2. Wait for the appropriate prompt from the system you
are calling.
3. When prompted, press the
key to send the DTMF
(Dual tone multi-frequency) number that follows your
pause.
“Sending DTMF” flashes on the display and the
transmitted tone sounds.
4. Repeat from step 2, if necessary.
Manual Pause Dialing
You can enter pauses manually during the dialing
process.
1. Enter the phone number of the service you want to
call, such as a bank’s teleservice phone number.
2. Press the
Options
soft key to access the options.
3. Press the
4
key for
Hard Pause
. The letter “P”
displays, meaning that a hard pause will occur at that
point in the dialing sequence.
4. Enter the number to be sent after the pause, such as
credit card number or bank account number, and then
press the
key to dial the first number.
5. To transmit the additional number after connecting,
press the
key again at the prompt for the pause.
“Sending DTMF” flashes on the display and the
transmitted tone sounds.
Voice Dialing
Before using the voice dialing feature, you must record
names and numbers in your phone using the
Voice Dial
menu (
Menu 6-1
). For further details, see page 84.
1. To place a call, press and hold the
key or open the
folder, depending on the
Activate By
menu option
(
Menu 6-1-4
). See page 86.
2. At a voice prompt, say a name into the microphone.
• If the phone recognizes the name, the phone
attempts a connection.
• If the phone does not recognize the name, the
phone sounds an alert and prompts for the name
again .
3. The phone dials the corresponding number.