ENGLISH
✤
-
-
1.
2.
3.
4.
5.
■
■
■
Preparation
24
24
Using the Lithium Ion Battery Pack
✤
The amount of continuous recording time available depends on :
-
The type and capacity of the battery pack you are using.
- How often the Zoom function is used.
It is recommended that you have several batteries available.
Charging the Lithium Ion Battery Pack
1. Attach the battery pack to the camcorder.
2. Connect the AC Power adapter to an AC cord
and connect the AC cord to a wall socket.
3. Connect the DC cable to the DC jack socket
on the camcorder.
4. Turn the Camera power switch to off, and the
charging indicator will start to flash, showing
that the battery is charging.
5. When the battery is fully charged, disconnect the battery
pack and the AC Power adapter from the camcorder.
■
Even with the power switched off, the battery pack will still
discharge if it is left connected to the camcorder.
Reference
■
The battery pack may be charged a little at the time of purchase.
■
To prevent reduction in the life and capacity of the battery pack, always
remove it from the camcorder after it is fully charged.
Blinking time
Charging rate
Once per second
Less than 50%
Twice per second
50% ~ 75%
Three times per second
75% ~ 90%
Blinking stops and stays on
90 ~ 100%
On for a second and
Error - Reset the battery pack and
off for a second
the DC cable
M U
LT I
5
50%
50% ~ 75%
75% ~ 90%
90 ~ 100%
