Specification
1.
2.
3.
Item
SCD-2021RN
SCD-2021RP
12
Weatherproof IR Camera
User Manual
13
Weatherproof IR Camera
User Manual
14
Weatherproof IR Camera
User Manual
8
Weatherproof IR Camera
User Manual
9
Weatherproof IR Camera
User Manual
10
Weatherproof IR Camera
User Manual
11
Weatherproof IR Camera
User Manual
Installing Camera
Separate the LOCKING BEZEL by turnning anti-clockwise and separate the WALL BRACKET.
Connecting to Power
• Connect the adapter to the power input connector as shown in the figure below.
(The Adapter is not provided with the Camera.)
Use a DC 12V.
Adapter (not provided)
Power Input Connector
Resistance of copper wire [at 20Cº(68ºF)]
• As the voltage drop according to the length of the cable in the above table, a camera may malfunction if
there is an excessively long cable run.
* Voltage for camera operation: DC 12V±10%
* Voltage drops in the above table are variable according to types of cable manufacturer.
For DC Power Type
Copper wire size (AWG)
#24(0.22mm
2
) #22(0.33mm
2
)
#20(0.52mm
2
)
#18(0.83mm
2
)
Resistance (
Ω
/ m)
0.078
0.050
0.030
0.018
Voltage Drop (V/m)
0.028
0.018
0.011
0.006
Connection to Monitor
• As a connecting method varies according to instruments, refer to the manual supplied with the instrument.
• Connect the cable after power is turned off.
Connect the VIDEO-OUT jack to the VIDEO-IN jack of monitor.
BNC
If you have trouble operating your camera, refer to the following.
If the guidelines do not enable you to solve the problem, contact an authorized technician.
◾
The image on the screen is dim.
• Check if the lens are stained. If dirty, clean the lens with soft, clean cloth.
• The image is dimmer at night than daytime. If the focus is not right, adjust it at daytime.
◾
The contrast on the screen is too weak.
• Adjust the contrast feature of the monitor.
• If the camera is exposed under too strong light, change the camera position.
◾
The camera is not work properly, and the surface of the camera case is hot.
• Check that you have connected the camera to a proper power (DC 12V±10%).
Troubleshooting
Specification
1/3” CMOS
650 TV lines
3.6mm
2
H: 15,734Hz V: 59.94Hz
SCD-2021RN
976(H) x 496(V)
50dB
0 LUX ( IR-LED )
( ICR )
20m
Item
Imaging Device
Active Pixels
Video
Scanning System
Synchronization
Frequency
Horizontal Resolution
Min. Illumination
S/N Ratio
Interlace
Internal
SCD-2021RP
H: 15,625Hz V: 50.00Hz
Lens Type
Focal Length
Max. Aperture Ratio
Digital Noise Reduction
Operational
Day & Night
Gain Control
Shutter Mode
IR Distance
White Balance
Auto
Auto
Auto
Auto (Rolling Shutter)
Auto (3,200K° ~ 6,500K°)
12V DC
Max. 0.25A
278g
Environmental
Operating Temperature
/ Humidity
-10°C ~ +50°C (+14°F ~ +122°F) / 20% ~ 85% RH
Electrical
Input Voltage
Current
Mechanical
Dimension
Weight
※
The specification for this product may change without prior notice for product improvement.
Dimension
Unit : mm
Select a position where you want to install the camera, and use the screw bolts to mount the
wall bracket onto the wall or ceiling.
ȞȞȞȞ
Adjust the camera lens and the CAMERA HOLDER to face the area to be monitored, and
then turn the LOCKING BEZEL clockwise.
LOCKING BEZEL
WALL BRACKET
CAMERA HOLDER
Unlocking direction
(Anti-clockwise)
Locking direction
(Clockwise)
Monitor
Ø 93 x 78 mm
