14
15
5.
When you install the
Mount bracket
on the ceiling, remove the
Ceiling mount opener
by pressing
it hard to connect the line attached on your camera through the hole in the ceiling. Otherwise, you
can use the empty space opposite to the CAMERA FRONT sign for line connection.
6.
Now attach the
Main body
to the
Mount bracket
by rotating it in the LOCK direction after aligning
the
Groove mark
on the Main body with the wide groove around the CAMERA FRONT inlay.
7.
Adjust the camera direction. For more details on the direction control, see “Adjusting the camera
direction,” on the same page. When required to adjust the zoom and focus for your camera, see
“Connecting cables and changing the settings,” on page 10.
8.
Attach the
Inner cover
to the
Main body
by pressing it until a “click” sound is heard after aligning
two screw holes on the
Wing lockers
of the
Inner cover
with two screw holes on the Main body’s
left and right sides.
9.
Finally attach the
Cover dome
to the
Main body
by pressing it until a “click” sound is heard after
aligning the bump inside the Cover dome with the
Groove mark
on the Main body.
❚
Adjusting the camera direction
When the camera is fixed on the ceiling, you can adjust
the camera viewing angle. You can rotate your camera
leftward or rightward (Panning), and can change the slope
of your camera upward or downward (Tilting).
In case of panning, the rotation limit of your camera is
set to 355 degree (100 degree clockwise and 255 degree
counterclockwise). The rotation is stopped by the
Stopper
inside of the camera. For panning control, first unfasten
two screws located on the bottom and rotate in the
direction you want, and then fasten them to fix the camera.
In case of tilting, you can change the slope of your camera
from zero to 90 degree. However if the slope angle is
under 17 degree, you can encounter a partial image hide
problem. To fix the location after adjusting the tilting angle, use the
Tilt fixing screws
.
To adjust the focus and zoom of your camera, use the
Zoom lever
and
Focus lever
. When
you install the camera on the inclined ceiling or wall, you can rotate the camera lens to see
a correct direction image.
Panning
Tilting
Lens rotation
AB68-00648C(01)Eng.indd 14
2007-03-19 ¿ÀÀü 10:35:04
