background image

EXPLANATION OF 

SAFETY RELATED SYMBOLS

This symbol indicates that dangerous 

voltage consisting a risk of electric 

shock is present within this unit. 
This symbol indicates that there are 

important operating and maintenance 

instructions in the literature 

accompanying this unit.

WARNING

•  To reduce the risk of fire or electric shock, do 

not expose this appliance to rain or moisture.

•  To prevent injury, this apparatus must 

be securely attached to the floor/wall in 

accordance with the installation instructions.

•  If this power supply is used at 240V ac, a 

suitable plug adapter should be used.

WARNING

1.  Be sure to use only the standard adapter 

that is specified in the specification sheet. 

Using any other adapter could cause fire, 

electrical shock, or damage to the product.

2.  Incorrectly connecting the power supply or 

replacing battery may cause explosion, fire, 

electric shock, or damage to the product.

3.  Do not connect multiple cameras to a single 

adapter. Exceeding the capacity may cause 

abnormal heat generation or fire.

4.  Securely plug the power cord into the 

power receptacle. Insecure connection 

may cause fire.

5.  When installing the camera, fasten it 

securely and firmly. The fall of camera 

may cause personal injury.

6.  Do not place conductive objects (e.g. 

screwdrivers, coins, metal parts, etc.) or 

containers filled with water on top of the 

camera. Doing so may cause personal 

injury due to fire, electric shock, or falling 

objects.

7.  Do not install the unit in humid, dusty, or 

sooty locations. Doing so may cause fire 

or electric shock.

8.  If any unusual smells or smoke come 

from the unit, stop using the product. In 

such case, immediately disconnect the 

power source and contact the service 

center. Continued use in such a condition 

may cause fire or electric shock.

9.  If this product fails to operate normally, 

contact the nearest service center. Never 

disassemble or modify this product 

in any way. (SAMSUNG is not liable 

for problems caused by unauthorized 

modifications or attempted repair.)

10. When cleaning, do not spray water 

directly onto parts of the product. Doing 

so may cause fire or electric shock.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

CAUTION

RISK OF ELECTRIC SHOCK. 

DO NOT OPEN

01-B5342_B5343-00648C(03)Eng.ind2   2

2008-08-22   오후 4:47:14

Summary of Contents for SCC-B5342

















Reviews: