English
–
17
ENG
How to use OSD Menu
sign
ct
D
.
he
LC
-
e
e of
or a
O-
The
LEVEL
menu is used to adjust the
overall brightness, where “+” will increase the
brightness and “–” will decrease it.
②
If you set the
BACKLIGHT
option to
BLC
,
you will see a menu where you can set the
BLC
area.
you can set the desired
BLC
zone by defi ning
the size and location.
ALC
LENS
DC
LEVEL [00]----I----
BACKLIGHT
BLC
AREA
USER
<SIZE>
<LOCATION>
If you use an ordinary camera in a scene
with an intensive backlight, the object will be
displayed dark on the monitor affected by the
backlight. To solve this problem, you can use
the
BLC
(Back Light Compensation) function
to improve the sharpness of the image in
such a high contrast scene.
ELC (Electronic Light Control)
①
If you press the
SETUP
switch when the
ELC
submenu is selected, the corresponding screen
appears. You can make the
ELC
(Electronic Light
Control) function active or not.
ELC
LEVEL [00]----I----
BACKLIGHT
OFF
•
②
In similar to
ALC
setting, you can specify the
BLC
area.
ELC
LEVEL [00]----I----
BACKLIGHT
BLC
AREA
USER
<SIZE>
<LOCATION>
AGC
[OFF, VERY LOW, LOW, MID, HIGH, VERY
HIGH, USER, FIX]
The
AGC
(Auto Gain Control) menu is used to
set the
AGC
level of the camera. When the
AGC
is active, the camera automatically increases the
sensitivity by amplifying the Video signal when
the strength of the signal falls below the normal
value.
If
OFF
or
FIX
mode is selected in the
SENS-UP
menu, you can specify the
AGC
level.
If you press the
SETUP
switch with a
USER
sub menu selected, you will see the appropriate
screen.
AGC USER
LEVEL [16]
In
USER
mode, you can break down the level in
16 steps from
VERY LOW
to
VERY HIGH
to your
preference.
❖
