Samsung SCB-2020, User Manual

Page: 29 / 44

29
How to use OSD Menu
.
L
the
e
s
of
NCE
hich
DETAIL [0~3]
Controls the horizontal or vertical distinction.
V-SYNC [INT, LINE]
Select the vertical sync mode for INT or LINE .
If you select INT , the camera will use the internal
synchronization.
If selecting LINE , the camera will use the external
power source frequency for the synchronization.
You can adjust the LL-PHASE .
Note :
To use the LINE LOCK sync mode, L/L pulse input should be
applied before turning on the camera so that the LINE LOCK
menu can be selected.
When using LINE LOCK, make sure to input L/L pulse.
If L/L pulse input is interrupted while operating the camera in
LINE LOCK sync mode, it may cause shaking display or VPS
(Virtual Progressive Scan) function.
When operating in Line Lock mode, it switches to INT mode
internally if the L-pulse disappears.
Such switching may not be immediately refl ected to menu settings
displayed, and it will be refreshed when the page is updated.
In V-SYNC mode, video output may appear erroneous if
there is no L/L PULSE input.
In V-SYNC mode, you must enter L/L-PULSE; furthermore,
GND connection should be made for the device.
❖
❖

–
–
–
–
–
AGC COLOR SUP [LOW , MID, HIGH]
Adjust the color scheme according to the AGC
value.
REVERSE [OFF, H, V, H/V]
Mirrors video signals horizontally, vertically, or both.
POSI/NEGA [+, -]
Output as it is or mirror the video brightness signal.
PIP [OFF, ON]
Displays a sub image together with the main image
on the same screen using the Picture In Picture
function.
Note :
If more than one privacy zone is set and the PRIVACY SET is
set to ON, the PIP function will be deactivated.
If the INTELLIGENCE function is set to FENCE mode, the PIP
menu will be deactivated.
DIS [OFF, ON]
Digital Image Stabilization will set the anti-shake
compensation.
Note :
If you set DIS to ON, the compensation area will be enlarged
as set in the digital zoom factor.
If you set the digital zoom factor to greater than the enlarged zoom
factor for the compensation, the DIS function will be deactivated.
❖
❖
❖
❖

–
–
❖

–