SCB-1001PD
POWER
VIDEO
16_ Connection
For DC power
Connection
Adaptor.
• Since SCB-1001PD the power specification
support DC, connect DC 12V, 500mA
• As shown in the table above, voltage decreases as the wire gets longer.
Therefore use of an excessively long adaptor output line for connection to the
camera may affect the performance of the camera.
There may be some deviation in voltage drop depending on the type of wire and the
manufacturer.
When the resistance value of copper wire is at [20°C(68°F)]
Copper wire size (AWG)
#24(0.22mm
2
)
#22(0.33mm
2
)
#20(0.52mm
2
)
#18(0.83mm
2
)
Resistance (Ω/m)
0.078
0.050
0.030
0.018
Voltage Drop (V/m)
0.028
0.018
0.011
0.006
Standard voltage for camera operation :
SCB-1001P : DC 12V±10%, AC 24V±10%
SCB-1001PD : DC 12V±10%
Be sure to connect power only after all the installation is complete.
Note that AC / DC adaptor is not supplied with camera.
Ground should be connected to the GND terminal.
• Coaxial Communications System
• OSD Control method
Using coaxial communications
