7
Samsung Electronics
Disassembly and Reassembly
No
Parts
Procedure
Remark
2
3
4
Electrical Parts
(Main PCB)
Tray Drain
Heat Exchanger
1) Take all the connector of PCB upper side
out.(Including Power Cord)
2) Detach the outdoor unit connection wire
from the Terminal Block.
3) If pulling the main PCB up. It will be taken
out.
1) Pull Tray Drain out from the Back Body.
1) Loosen 2 fixing earth screws of right side.
2) Detach the Connection Pipe.
3) Detach the Holder Pipe at the rear side.
4) Loosen 2 fixing screws of right and left
side.
5) Lifting the Heat Exchanger up a little
to push the up side for detach from the
indoor unit.
DB98_16340A(1)_SC18AS0 04/2/9 3:06 PM Page 7
Summary of Contents for SC18AS0
Page 35: ...MEMO Samsung Electronics 34 ...
Page 36: ...MEMO 35 Samsung Electronics ...
Page 37: ...MEMO Samsung Electronics 36 ...
