ENGLISH-
20
ENGLISH-
21
Caution
X
Suction may reduce noticeably due to wrong
reassembling of the dust filter.
X
Make sure the dust filter is completely dry
before putting it back into the vacuum
cleaner. Allow 12 hours for it to dry.
X
Dry the dust filter in the shade, not under
sunlight, to prevent transformation or
discoloration.
X
You may wash the dust bin with cold water.
X
When suction is noticeably reduced
continuously or vacuum cleaner abnormally
overheats, please clean the outlet filter.
X
Please contact a nearest service center if you
cannot remove foreign matters from the hose.
Notes and cautions
Troubleshooting
PROBLEM
SOLUTION
Motor does not start.
X
Check cable, plug and socket.
X
Leave to cool.
Suction force is
gradually decreasing.
X
Check for blockage and remove.
Low or decreasing
suction.
X
Please check filter and, if required, clean as illustrated in the instructions. if
filters are out of condition change them to new ones.
Cord does not rewind
fully.
X
Pull the cord out 2-3 m and push down the [Cord rewind] button.
Vacuum cleaner does
not pick up dirt.
X
Check hose and replace if required.
Body overheating.
X
Please check filters, if required clean as illustrated in the instruction.
Static electicity
discharge.
X
Please decrease power suction.
X
This can also occur when air in the room is very dry.
Please ventilate the room to air humidity become a normal.
SC11H4050V SERIES_3ge_00724D-04_USA_160325.indb 21
2016-03-25 �� 5:21:59
