Rear View of the CD-ROM Drive
3
1
1
2
3
4
5
Digital Audio
You can connect a sound card or MPEG card which support Digital Audio to your drive using this
two-pin connector.
2
Audio Output Connector
You can connect a sound card to your drive using this four-pin connector.
☛
This function is not covered in detail in this guide. Refer to the documentation
supplied with your sound card.
3
Device Configuration Jumper
Usually, this is a pre-set configuration as illustrated below.
☛
Verify that the setting is as illustrated. If it is not, simply remove the jumper
and place it in the correct position.
4
Host IDE Interface connector
This input/output interface connector is used to connect the 40-pin flat cable from the IDE
interface to the CD-ROM drive.
5
Power Connector
The power connector is a four-conductor male plug.
C
S
S
L
M
A
