manualshive.com logo in svg

Samsung SAMTRON 58V, Manual

Share
Download
Samsung SAMTRON 58V Manual Download Page 13

 
 

  

 

  

Menu button [

] 

 

Opens the OSD menu. Also used to exit the OSD menu or 
return to the previous menu.  

Adjust buttons [

] 

These buttons allow you to highlight and adjust items in the 
menu. 

Enter button [ ]

Used to select the OSD menu.

Power button

Use this button for turn the monitor on and off.

Power indicator

This light glows green during normal operation, and blinks green 
once as the monitor saves your adjustments.

See 

PowerSaver

 described in the manual for further information regarding power saving 

functions. For energy conservation, turn your monitor OFF when it is not needed, or when 
leaving it unattended for long periods.

 
 

 

 

Rear  

 

(The configuration at the back of the monitor may vary from product to product.)

 

  

 

Power port

 

Connect the power cord for your monitor to the power port on 
the back of the monitor.  

Summary of Contents for SAMTRON 58V












































































Reviews:

No comments

Brands by name

Popular brands

Load more brands