Samsung S630 - Digital Camera - Compact, Service Manual

Page: 41 / 105

48
Ⅲ. ADJUSTMENT
3> Adjustment program file
To adjust all items, all kinds of code by items have to be inserted in program file and saved them to the SD card
as TXT file type. The codes are listed below.
< Description of TXT file >
Use the Memo pad of Basic Windows program and save it as Ä"STS373ADJ.txt"
// PM Batch Test 8-process //
// adj control
adj_control check_process_id 65535
adj_control set_process_id 65534
adj_control save_e2prom 1 // save eeprom
adj_control save_data_file 1 // save csv...
adj_control save_process_pass 1
adj_control batch 1 // enable 8 adj...
adj_control osd_delay 0 // OSD Disable
adj_control signal 500// start signal
//adj_control signal 300// start signal
//adj_control signal 300// start signal
//======================================#1. OB(63 OB ADJ SKIP)
delay 5
mode program
adj_ob preview_agc 96
adj_ob preview_target_rgb 0 0 0
adj_ob preview_luma_min_max 150 4000
adj_ob capture_agc 96
adj_ob capture_target_rgb 0 0 0
adj_ob capture_luma_min_max 150 4000
adj_ob run
delay 5
//adj_control signal 100// start signal