manualshive.com logo in svg

Samsung S4335-AW Series, User Manual

Share
Download
Samsung S4335-AW Series User Manual Download Page 33

 

33 

 

 

Battery 

 

F

IGURE 

14

 

B

ATTERY

 

①

 

Battery terminal part

 

 

 

 

CAUTION: 

Warning for using the lithium ion battery. Mishandling of the battery may cause heat,fire, explosion, and/or 

deterioration. Be sure to observe the following guidelines:

 

• 

If the battery has to be stored for a long period, it should be removed from the application (detector and 
recharger) and stored in a place where the humidity and temperature are low.

 

• 

Do not use the battery in a high static energy environment where the protection device can be damaged.

 

• 

Do not expose the battery to direct sunlight or high heat (such as fire).

 

 

 

Battery/Battery Cover Installation 

Tilt the top part of the battery tightly and insert the battery to press to be placed on the detector safely. 

 

 

F

IGURE 

15

 

B

ATTERY 

I

NSTALLATION

 

 

  
 
 
 
 
 
 
 
 
 
 
 

•

When the battery use period is much shorter than the usual use time, replace the battery.

 

•

When the battery is not used for a long time, charge the battery and disconnect the power.

 

Summary of Contents for S4335-AW Series


















































Reviews:

No comments

Brands by name

Popular brands

Load more brands