S3C6400/6410 INSTALLATION MANUAL FOR POST PROCESSOR
8
Preliminary product information describe products that are in development,
for which full characterization data and associated errata are not yet available.
Specifications and information herein are subject to change without notice.
Second, please compile the post processor module as shown below. (At Host Side)
Before compiling the post processor driver module, please modify “Makefile”. kernel directory should be
modified in “Makefile” like below.
FIGURE . Makefile of Post processor
s3c_pp.ko file is module object.
FIGURE . The post processor module compilation
Third, please do the following(At target Side). Insmod command must be used at target side.
