background image

12

You can rotate your product as shown below.

4

5

6

1

2

3

 

Be sure to fully extend the stand before rotating the product.

 

If you rotate the product without fully extending the stand, the corner of the product may hit the 
floor and get damaged.

 

Do not rotate the product counterclockwise. The product may get damaged.

 

When rotating the product, be careful not to damage the product by hitting the object or stand.

Anti-theft Lock

 

An anti-theft lock allows you to use the product securely even in public places.

 

The locking device shape and locking method depend on the manufacturer. Refer to the manuals provided 
with your anti-theft locking device for details.

To lock an anti-theft locking device:

Fix the cable of your anti-theft locking device to a heavy object such as a desk.

Put one end of the cable through the loop on the other end.

Insert the locking device into the anti-theft lock slot at the back of the product.

Lock the locking device.

 

An anti-theft locking device can be purchased separately.

 

Anti-theft locking devices can be purchased at electronics retailers or online.

Summary of Contents for S27A804NMN










































Reviews: