background image

33

System

2nd

3rd

Description

FreeSync

FreeSync

 technology is solution that eliminates screen tearing without all the usual lag and latency. 

FreeSync

 can be operated when you use 

AMD's graphic card with supporting 

FreeSync

 solution.

For more information, see 

FreeSync

 page.

DP OUT

Select which input source to output to the screen. MST may not be supported depending on the video card.

 

USB Type-C(MST)

: Displays the USB Type C input screen as an expansion screen on the DisplayPort output port.

 

USB Type-C(SST)

: Displays the USB Type C input screen as a duplicate screen on the DisplayPort output port.

 

DisplayPort(MST)

: Displays the DisplayPort input screen as an expansion screen on the DisplayPort output port.

 

DisplayPort(SST)

: Displays the DisplayPort input screen as a duplicate screen on the DisplayPort output port.

 

HDMI(SST)

: Displays the HDMI input screen as a duplicate screen on the DisplayPort output port.

 

S24A60*U / S27A60*U / S32A60*U model only.

Volume

Change the 

Volume

 setting.

Eco Saving Plus

The 

Eco Saving Plus

 function reduces power consumption by controlling the electric current used by the monitor panel.

 

Off

: Deactivate the 

Eco Saving Plus

 function.

 

Auto

: The power consumption will automatically be reduced by about 10% over the current setting.

(The reduction of power consumption depends on the customer screen brightness condition.)

 

Low

: Saves up to 25 % energy compared to the maximum brightness.

 

High

: Saves up to 50 % energy compared to the maximum brightness.

 

This menu is not available when 

Eye Saver Mode

 is enabled.

 

This menu is not available when 

Game Mode

 is enabled.

 

This menu is not available when 

Picture Mode

 is set to 

Dynamic Contrast

 mode.

Summary of Contents for S24A600UCE
















































Reviews: