11
Connecting DMS
(2) Connect the LAN cable to the LAN port
on the bottom of the S-NET mini.
•
Incorrect connection may cause
communication error.
(1) Connect the power cable(220V, 60Hz)
to the power terminal on the bottom of
S-NET mini.
(3) Hold the S-NET mini and attach the
S-NET mini to the installation plate by
fasten the hooks on the bottom of the
installation plate.
•
Make sure to tighten the
S-NET mini to prevent
from damage by dropping the product.
�������
• S-NET mini supports up to 4 DMS connections.
• Separate the power cable from communication cables when connecting
Centralized controller to S-NET mini.
(Communication error may occur due to electromagnetic interference.)
Hooks
Power cable
Power cable
LAN cable
INSTALLING S-NET mini
(Continued)
MST-S3W_IM_E_29360-1.indd 11
2008-03-10 ｿﾀﾈﾄ 2:15:27
