6
1. PRECAUTIONS (SAFETY WARNINGS)
●
Upon electronic Control system repair/change, make sure the set is
unplugged. Beware of electric shock.
●
Use rated electronic Control equipment.
Make sure to check ModeL name, Rated voltage, Rated current, Operation
Temp, etc.
●
Do not use excessive force to separate wiring connectors. Ensure that all
wiring connectors are refitted correctly in the original position.
●
Upon repair, completely remove dust or other foreign substances from
housing, harness, connector, etc.
To prevent fire by tracking, short, etc.
●
Check whether water has penetrated into the electronic Control system.
If there is any kind of trace, take necessary measures such as related
component change, insulation tapping, etc.
●
After repair, check the assembled state of parts.
It should be the same as the original state.
●
Check the surrounding conditions.
Change the location, if the fridge is located at humid, wet places or the
installed state is unstable.
●
If needed, ground the fridge.
Especially, if there is a possibility of electric leakage, ground is indispensable.
●
Advise the customer if you see that the electrical socket is overloaded.
●
Replace the mains lead if you see signs of damage.
●
Do not allow consumers to keep things except for food.
Pharmaceutical, Chemical substances : These are not possible to be fine-
Controlled with a consumer fridge.
Flammable material (alcohol, benzene, ether, LPG, etc) : possibility of
explosion.
5
TWIN 냉동고 SM.indd 5
2009.4.9 2:55:28 PM
Summary of Contents for RZ60EESW1
Page 15: ...15 2 5 DIMENTION 2 Product Specifications TWIN 냉동고 SM indd 15 2009 4 9 2 55 41 PM ...
Page 66: ...66 8 SCHEMATIC DIAGRAM 8 1 BLOCK DIAGRAM TWIN 냉동고 SM indd 66 2009 4 9 2 57 6 PM ...
Page 67: ...67 8 SCHEMATIC DIAGRAM 8 2 CIRCUIT DIAGRAM TWIN 냉동고 SM indd 67 2009 4 9 2 57 53 PM ...
