Operations
Operations
Shelves
45°
To Remove Shelves:
1. Fully extend the shelf you wish to remove (Fig. A)
2.
Grap left
(front) end
side of the rail firmly with left hand
(shown in picture A)
L
if
t
the shelf
holding wire
with right hand while pushing wire into inner
direction and lift
up 45°
as
shown in
Fig. B
•
NOTE
Do not cover racks with aluminum foil or any other material that will prevent adequate
air circulation within the cabinet.
If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before
restart the unit. If you need attempt to restart before this time delay, the Wine cooler
will not start.If first time use or longer absence of using, the temperature will difference
between setting and LED display temperature. After running a period, the temperature
will be reverting back.
NOTE
Temperature Alarm
If inner temperature is higher than 23°C, The “HI” is shown in display panel, and the
buzzer alarm after one hour continuously. It inform that the inner temperature is too
high, please check the reason.
If inner temperature is lower than 0°C, The “LO” is shown in display panel, and the
buzzer alarm and the malfunction indicator light light at the same time.
•
After removing left side, continue same way for separating right side.
English
23
Rail
Wire
Shelf
3
.
Be cautious
and protect
your
hands all time when separating wire shel
ves.
WARNING
Picture A
Summary of Contents for RW51TS338SR
Page 1: ...Wine Cellar User manual RW51TS338SR AA ...
Page 31: ...Memo ...
Page 33: ...Enfriador de vino Manual del usuario RW51TS338SR AA ...
Page 63: ...memorándum ...