Installation
English
32
Ins
tallation
4.
After you turn on the refrigerator, let the ice maker make ice for 1 to 2 days. Over that
period of time, throw out the first 1 or 2 buckets of ice the ice maker makes to ensure
all impurities have been removed from the water line.
NOTE
• If you have to repair or disassemble the water line, cut off 6.35 mm of the plastic tubing
to make sure you get a snug, leak-free connection.
• Leaving the water line disconnected may cause the water valve to produce a buzzing
sound over time.
• If water is not supplied to the refrigerator, make sure to turn the ice maker off.
Water filter (not provided)
The water filter and the water filter installation kit containing necessary parts illustrated
in this section are not provided. You must purchase the water filter and the water filter
installation kit at a local Samsung service center.
To connect to the water supply line
01
02
03
07
06
05
04
09
10
08
01
Cold water line
02
Pipe clamp
03
Plastic line
04
Compression nut
05
Compression sleeve
06
Packing nut
07
Shut off valve
08
Filter cartridge
09
Cartridge holder
10
Cut vertically by 90 degrees
1.
Shut off the main water line and turn the ice maker off.
2.
Locate the nearest cold potable water line.
3.
Follow the instructions mentioned in the water filter installation kit.
4.
After connecting the water line to the inlet of the cartridge holder with the plastic line
fully inserted, insert and tighten the filter cartridge.
5.
Turn on the water line and flush 11 liters of water (approximately 6 minutes) through
the filter before use.
Untitled-12 32
2018-06-04 11:50:15
