Operations
English
60
Operations
Water pressure
If you want to check how much water flows into the ice tray, follow these steps.
A
1.
Remove the ice bucket.
2.
Press the
button (A)
on the bottom of
the ice maker. Normally, the ice tray
fills with water in a few minutes.
3.
If the water level is lower than
expected, check the water pressure of
the water supply line from the water
source. This is not a system failure.
CAUTION
• Do not repeatedly press the button on the bottom of the ice maker when the tray is
filled with water. Water may overflow or ice may be jammed.
• Make sure the icemaker bucket is inserted properly. Otherwise, the ice maker will not
operate.
• If there is a power failure, remove the ice tray. Water may flow.
Untitled-2 60
2023-03-23 2:07:17
