26
ADJUST THE CLEARANCE BETWEEN THE DOORS
Making small adjustments between doors.
If the door of the freezer is lower than that of
the refrigerator.
If the door of freezer is higher than that of the
refrigerator.
3) After adjusting the doors, turn the nut (
①
) turn clockwise( ) until the lower end of the bolt, then tighten
the bolt again with the wrench (
➂
) to fix the nut(
①
).
If you do not fix the nut (
①
) firmly, the bolt (
➁
) may be released.
2) Please adjust the height difference between the doors turning the bolt (
➁
) turn clockwise( ) or
counter clockwise ( ).
When you turn clockwise ( ), the door goes up.
➂
WRENCH
➃
CAPS
➃
CAPS
Adjustment part
Adjustment part
➀
NUT
➁
BOLT
➂
WRENCH
➀
NUT
➂
WRENCH
➀
NUT
➂
WRENCH
➀
NUT
➁
BOLT
➂
WRENCH
➁
BOLT
➂
WRENCH
➁
BOLT
➁
BOLT
➁
BOLT
Please open the doors and adjust the doors as follows:
Warning) When it comes to the caps, they are just for the packing. So, throw them away after adjusting the heights of the freezer and the fridge doors.
1) Release the nut (
①
) on the lower hinge until the upper end of the bolt (
➁
).
First of all, remove the caps (
➃
) on the bolts at the bottom of the freezer and the fridge doors. When you release the nut(
①
), use enclosed hex wrench (
➂
) to turn
the bolt(
➁
) a little counter clockwise to make the nut(
①
) loose with your fingers.
NOTE
NOTE
NOTE
DA99-01023A(EN)-0.2 3/21/06 12:37 AM Page 26
