10_ setting up
REMOVING THE REFRIGERATOR DOORS
If your entrance won’t allow the refrigerator to pass easily through it, you can remove the doors.
Removing and Installing the Freezer door
A few things to mention first.
•
Make sure that you lift the door straight up so the hinges are not bent or broken.
•
Be careful not to pinch the wire harness on the door.
•
Place doors on a protected surface to prevent scratching or damage.
1.
Remove the upper hinge cover
1
using a screwdriver, and then disconnect the wires by
gently pulling them apart
2
.
2.
Remove hinge screws
3
and the ground screw
4
by turning counter-anticlockwise,
and take off the upper hinge
5
. Be careful that the door does not fall on you as you are
removing it.
3.
Remove the door from the lower hinge
6
by carefully lifting the door straight up
7
.
4.
After the refrigerator is placed to the specified position, install the freezer door in the reverse
order as follows:
.
setting up your side-by-side
refrigerator
3
4
5
7
6
2
