17
OPERATING INSTRUCTIONS & INSTALLATION
3-1) DISPLAY DESIGN
1) Freezer Temp Setting
1-1) With the initial power on, Freezer will be set at MID (-4°F/-20°C) and Refrigerator will be set at MID
(37°F/3°C) automatically. At this time, the number of LEDs (1 ~ 5) lighting up on the display panel means
intensity (MIN ~ MAX) of room control temperature (6.8 ~ -13°F/-14 ~ -25 °C) and as the intensity gets
increased, the number of LEDs increases and the set temperature become lowered.
1-2) Freezer Temp can be set from (6.8°F/-14°C)(MIN) to (-13°F/-25°C)(MAX) with Freezer temp setting button.
2) Refrigerator Temp Setting
2-1) Refrigerator Temp can be set from (44.6°F/7°C)(MIN) to (33.8°F/1°C)(MAX) with Refrigerator temp setting
button.
2-2) Refrigerator set temp varies slightly from actual temperature according to the user’s way of storing food
and peripheral temp. (If food is stored too close to Refrigerator Temp Sensor, it can block air circulation
resulting in weak or over cooling. So, be careful not to block it.)
Note) When power is out due to an instant power failure or the problems in an electric circuit and restored
again, the ref checks Refrigerator Temp. At this time, When Freezer Temp is lower than (41°F/5°C) ,
Refrigerator considers it as an instant power failure and restores the previous temp and functions stored
in EEPROM for use.
3-2) TEMP CONTROL
