16
CLEANING THE ACCESSORIES
INTERIOR LIGHT IN THE FREEZER (BASIC MODEL ONLY) / REFRIGERATOR
INTERIOR LIGHT IN THE FREEZER (MODEL WITH ICE AND WATER
DISPENSER)
CHANGING THE INTERIOR LIGHT
Before changing the interior light, unplug the appliance from the power supply. If you experi-
ence difficulty when changing the light, contact your service centre.
WARNING
Place a flat screwdriver under
the light cover hooks and
push in the direction of the
arrow.
Pull the cover in the direction of
the arrow.
After changing the bulb,
replace the light cover.
Lift and pull out the ice maker cover (
➀
).
Use a screwdriver to remove the light cover (
➁
).
Replace the bulb with a new one (
➂
), and then secure the
light cover back into place using a screwdriver.
Replace the ice maker cover.
➀
➂
Deodorizer (optional)
• Remove the cover with a flat blade screw driver as shown.
• Take out the cartridge from the cover and soak it in clean, warm water for
at least 4 hrs. Completely dry out the cartridge with sunlight for at least 8 hrs
in an open area.
• Repeat this process once or twice a year.
• If it is dried in a confined area, odor may be spread to that area.
• Keep the children away from yellow water, they may drink water.
NOTE
With CoolSelect zone
TM
Model
Without CoolSelect zone
TM
Model
DA99-00494B 4/7/03 2:29 PM Page 16
Summary of Contents for RS21FAMS
Page 34: ...34 ...
