DIGITAL PANEL
CONTROL PANEL (RS20BR**/RS20CR**)
Power Freezer
Speeds up the freezing process in freezer.
Power Cool
Speeds up the cooling process in fridge.
Freezer
To set the freezer temperature, press this
button repeatedly to change the set
temperature in sequence between -14
℃
and -25
℃
.
Fridge
To set the fridge temperature, press this
button repeatedly to change the set
temperature in sequence between
1
℃
and 7
℃
.
This light is on when you pressure the Power Freeze button.
?
Press this button to make the freezer reach the set temperature quickly.
Press this button again to cancel the Power Freeze mode.
Power Freeze
Freeze Temp: indicate the current freeze temperature. Fridge Temp: indicates the current fridge temperature.
This light is on when you press the Power Cool button.
?
Pressure this button to make the fridge reach the set temperature quickly.
Pressure this button again to cancel the Power Cool Mode.
Power Cool
4
•
•
•
•
Note
The inside temperature of the applicance
will increase if a large amount of hot articles are stored at
the same time, or the doors are opened frequently or for a long time.
INSTALLING REFRIGERATOR
When you adjust the refrigerator level, set the front legs slightly higher than the rear legs so that you can open and
close the doors more easily.
First disassemble the leg cover and then adjust the refrigerator level.
If your refrigerator tilts towards the left,
turn the left adjusting leg.
The appliance must be earthed before use.
Earthing wire
Copper pipe
Earthing screw
Never use unearthed power plug.
Connect the earthing wire (yellow/green or green).
You must earth the refrigerator to prevent any power leakage or electric shock caused by current leakage
from the appliance.
Never use gas pipes, phone lines or other potential lightning rods as earthing.
EARTHING THE APPLICANCE
LEVELLING
WARNING
If your refrigerator tilts towards the right,
turn the right adjusting leg.
INS
TA
LL
AT
IO
N I
NS
TR
UC
TIO
NS
