![background image](http://html.mh-extra.com/html/samsung/rogue/rogue_user-manual_1193197070.webp)
67
The keyboard provides dual-use keys labeled with alphabetic
characters and numbers on the lower half and symbols on the
upper half. Press the key combination corresponding to the
character you want to enter.
Entering Characters
Characters can be entered using either Uppercase or Lowercase.
1.
Slide out the QWERTY keyboard and enter your text. By
default the Rogue™ is in Initial case and characters then
revert back to lowercase.
2.
Press the desired text key.
•
For example, to enter the word “Sam”, type the keyboard sequence
below.
•
If you make a mistake and enter the wrong character, press
to
erase a single character. Press and hold
to erase an entire
word.
Function
: Allows you to use characters displayed at
the top of the QWERTY keys. Examples: <, >,*, $, @,
#, ?
•
Press
once to toggle from letters to orange
special characters on the QWERTY keyboard.
When Function is ON, the
icon will appear
on the top annunciator line of the display.
•
Press
twice to lock the keyboard in Fn
mode. When Function is LOCKED, the
icon
will appear on the top annunciator line of the
display.
•
Press
once more to return to Abc mode.
Shift
: Toggles the casing for alphabet characters
between initial case, uppercase and lowercase.
•
Press
once to toggle from Abc to ABC.
•
Press
twice to toggle from ABC to abc.
•
Press
three times to toggle from abc to
Abc.
Backspace
: Deletes the previous character.
Enter
: Moves the insertion point to the next line in a
message.
u960.book Page 67 Tuesday, July 14, 2009 10:41 PM