Samsung RM255BABB, Training Manual

Page: 59 / 88

1. Disconnect the power cord of the refrigerator.
2. Remove the fixing screws (8) of compressor
cover.
3. Slide up and take off the compressor cover to
see the machine compartment.
4. Unscrew the electric box cover in the rear of
refrigerator with the crossed-head
screwdriver.(2 screws)
5. Separate the electric box by lifting up to see
pcb-main-assy.
The sub-condenser is located in the machine
compartment. Heat is released by the condenser
fan.
1. Desolder the compressor discharge
the sub-condenser outlet.
2. Take out the sub-condenser.
Machine Compartment Electric Box
Sub-condenser
DISASSEMBLY AND REASSEMBLY
Desoldering
Point
PCB-MAIN
ASSY
The condenser Fan is located in the middle of
the machine compartment. It cools down the sub-
condenser and the compressor.
1. Disconnect the condenser fan wire.
2. Separate the condenser fan hook attached to
the drain water tray by slightly lifting and
pulling the condenser fan.
3. Take the condenser fan assembly off.
Condenser Fan
When the solenoids receive a signal from the
micro-processor, they supply water to the water
dispenser or the ice maker.
1. Remove bracket screw (1) on cabinet bottom right sid.
2. Take the solenoid assembly out.
3. Disconnect the water tubes (3).
Water Solenoids
58 58