15
REVERSING THE DOOR SWING
• Before reversing the door, ensure first that the refrigerator is disconnect by the plug
from the mains. You should take out contents and accessories like door guard from
the doors. Be careful not to drop the doors during disassembling or assembling.
Warning
‑ Read these instructions completely and carefully
1. Handle parts carefully to avoid scratching the paint.
2. Lay out all the screws by their related parts to avoid using them in the wrong places.
3. Provide a non-scratching work surface for the doors. (ex:blanket)
4. During door reversing, refrigerator should not be stained with oil.
5. We recommend to use tools descrided below. (Possible to use simliar size of socket
wrench & wrench)
1. Disassemble the CAP CABI
after removing 2 screws.
These operating instructions cover various models.
The characteristics of your appliance may differ slightly from those described in this instructions.
‑ DISASSEMBLY OF THE FRIDGE DOOR
2. Disconnect electric wires
inside of the CAP CABI.
3. Remove 3 bolts on the top
of the refrigerator with 10mm
socket wrench. Make sure the
door is firmly closed.
4. Disassemble the Fridge door
by lifting it upward.
Be careful not to drop and
scratch the face of the
Fridge door.
5. Disassemble the COVER
WIRE DOOR on the top of
the fridge door with a flat-
head screw driver by putting it
into the indicated position(∆).
6. Disjoin the COVER WIRE
HINGE R from the ASSY
HINGE UPP as shown. Take
out the electric wire from the
COVER WIRE HINGE R.
ASSY HINGE UPP
COVER WIRE HINGE R
COVER WIRE DOOR
Not provided
Additional part
Phillips Head
Driver (+)
Flat Head
Driver (-)
10mm
Socket Wrench
(for bolts)
11mm
Wrench
(for hinge shaft)
Allen Wrench
(3/16inch)
(for Mid hinge)
Cover Wire
Hinge L
(In Top Cover)
CAP CABI
DA99-01220A(EN)-1.8.indd 15
2010.10.12 11:53:36 AM
