02 O
p
ERA
TING
01 SETTING
up
Setting up
_7
115º
770mm
558mm
538mm
1125mm
• Do not install the Refrigerator where the
temperature will go below 50ºF (10ºC).
• Pull the unit straight out when installing,
servicing or cleaning behind the refrigerator and
push it straight back after work is complete.
Make sure your floor can support fully loaded
refrigerator.
REvERSING THE
REFRIGERATOR dOOR
Before you reverse the refrigerator door,
make sure to unplug the refrigerator.
If this operation is not performed by After
sales service, it is not covered by the warranty.
1. Remove the screws from the fridge door.
2. Remove the screws from the refrigerator.
Disassemble the fridge door and hinges.
3. Remove the screws from the freezer door.
4. Remove the screws from the refrigerator.
Disassemble the freezer door and hinges.
5. Switch the Screw cap from the left to the right.
Be careful not to get injured while
removing the Screw cap.
WARNING
cAuTION
DA99-03418A(SAM Built In).indd 7
2010.12.22 2:38:26 PM