English
67
Oper
ations
Water pressure
If you want to check how much water flows into the ice tray, follow these steps.
A
1.
Remove the ice bucket.
2.
Press the
button (A)
on the bottom of
the ice maker. Normally, the ice tray fills
with water in a few minutes.
3.
If the water level is lower than expected,
check the water pressure of the water
supply line from the water source. This
is not a system failure.
CAUTION
• Do not repeatedly press the button on the bottom of the ice maker when the tray is
filled with water. Water may overflow or ice may be jammed.
• Make sure the icemaker bucket is inserted properly. Otherwise, the ice maker will not
operate.
• If there is a power failure, remove the ice tray. Water may flow.
Ice maker (applicable models only)
The refrigerator has a built-in ice maker that automatically dispenses ice.
• The overall design and/or accessories may differ with the model.
• The ice scoop is provided in the refrigerator.
• This product has two types of ice
makers.
• You can simply slide out the ice bucket
tray to use ice, and then slide it back in
after use.
WARNING
Choking hazard
: Ice may cause choking in
small children.
Ice making
After you have installed your refrigerator and plugged it in, follow these instructions to
ensure proper ice making and to keep the ice bucket full of ice.
Untitled-1 67
2022-03-25 6:06:46
