setting up
_15
01
s
E
ttin
G
u
P
aDJustinG tHE DooRs
After putting the doors back on the refrigerator, make sure the refrigerator is level so that you can make final
adjustments.
If the refrigerator is not level, it will not be possible to get the doors perfectly even, which may cause moisture
condensation and increased energy bills.
For example, when the left side is lower than the right side, insert a flat-blade screwdriver(-) into a notch on the
left control lever, and turn it counterclockwise to level the door.
Turning it clockwise to lower the refrigerator and counterclockwise to raise it.
For the left side is higher, do it with right lever.
We do not recommend making small adjustments with the control lever. Instead, refer to the next page for the best
way to make minor adjustments to the doors.
Both control levers must be surely touching the floor to avoid possible personal injury or property damage because
of tipping.
CAUTION
Control Lever
flat-blade screwdriver(-)
flat-blade screwdriver(-) Control Lever
