Setting Up
_13
01
s
E
tting
u
P
5. Position the Top Table(
2
) in place.
With a Philips head screwdriver, insert and tighten the 3
screws into the Top Table. With the door opened, reinsert the
Top Table cap(
1
) and close the doors.
When reattaching the top table, make sure that the
wires are not pressed or damaged by the top table.
2
1
REAttACHing tHE REFRigERAtoR DooRs
4. Connect the water line (
5
) and then insert a
clip on the coupler with pulling tube.
Connect the one connector(
4
) on left side
door and two connectors (
3
) at each side
of the top cap.
3
4
Dispenser
Door Tube
Cabinet
Tube
Dispenser
Door Tube
Cabinet
Tube
Red Clip
(1/4”)
Red Clip
(1/4”)
The clip is enveloped inside of the top cap.
Dispenser
Door Tube
Cabinet
Tube
Dispenser
Door Tube
Cabinet
Tube
Red Clip
(1/4”)
Red Clip
(1/4”)
5
3
The water line (
5
) must be fully inserted to the marked line to prevent
water leakage from the dispenser.
CAUTION
coupler
DA68-01819A.indb 13
2009.9.22 3:9:38 PM
