setting up
_11
01
SETTING
UP
2.
Disconnect two connectors (
2
) on the left
side door. To remove the water coupler from
the hinge, twist and pull it from the hinge.
Remove the water line (
3
) while pressing the
marked part (
4
) of the water line coupler.
If a red clip is on the coupler, it must be
removed before removing the tube.
2
3
4
Red Clip
(1/4”)
3.
Pull and remove the hinge lever (
5
). Remove
the ground screw (
6
) attached to the upper
left door hinges with a philips screwdriver (+).
Remove the upper left and right door hinges
(
7
).
5
6
7
4.
Lift the door straight up to remove.
5.
Remove the screw (
8
) attached to the
lower left and right door hinges with a philips
screwdriver (+). Remove the 2 hex head bolts
(
9
) attached to the lower left and right door
hinges with an allen wrench (3/16”). Remove
the lower left and right door hinges (
10
).
Allen wrench
10
8
9
CAUTION
REATTACHING THE
REFRIGERATOR DOORS
To reattach the fridge doors after you have moved
the fridge to its final location, assemble the parts
in reverse order.
1.
The Water Line must be fully Inserted to the
center of transparent coupler to prevent water
leakage from the dispenser.
2.
Insert the clip in the top plate and check that it
Center of transparent coupler
The Guide Lines
Dispenser
- TYPE A -
- TYPE B -
By placing the 3 screws again ensure
that the wires are in not to damage the
harness.
DISASSEMBLING THE FLEX DOOR
1.
Take out the upper drawer by lifting it up.
2.
Take out the lower basket (
1
) by lifting the
basket up from the rail system.
1
3.
Press the fixing hook of rail system.
CAUTION
DA68-02601A-16.indb 11
2018. 10. 8. 오후 4:32
