01 SETTING UP
Setting up your french door refrigerator
_23
Connecting to water supply line
• Shut off the main water supply line and turn the Ice
maker to the off position.
• Locate the nearest cold drinking water line.
• Follow the instructions in the water filter installation kit.
• After connecting the water supply line to the Cartridge
Holder inlet (insert plastic line in fully), install the Filter
Cartridge.
• Turn on water supply and Flush 3 gallons through filter
before use (flush approximately 6 minutes)
90 degree
1. Cold Water line
2. Pipe Clamp.
3. Plastic line
4. Compression Nut
5. Compression Sleeve
6. Packing Nut
7. Shut Off Valve
8. Filter Cartridge
9. Cartridge Holder
Using the water filter (not supplied)
Incorrect Correct
Connect the water line to the fridge
• Connect the plastic line on the back of your fridge to the cartridge holder
outlet (fully insert the plastic line to the cartridge holder outlet).
• Insert plastic clip to the cartridge holder inlet and outlet.
• Turn water on and check for any leakage.
NOTE
Do not use copper line.
Cartridge
Holder
Clip
Filter
cartridge
Plastic line
(Provided)
NW2-FDR_DA68-01845C-26_EN.indd 23
2019-01-22 4:41:51
Summary of Contents for RF21 Series
