50
DISASSEMBLY AND REASSEMBLY
This document cannot be used without Samsung's authorization.
4-20) Evap (Sensor Temp) FRE
Part Name
How To Do
Descriptive Picture
Evaporator
FRE
1. Remove the hosing connector at the left.
2. Disassemble Sensor Housing from TPA, then
cut the Cable Tie.
3. Cut the Cable tie that tie Accumulator and
Sensor.
4. Remove the sensor temp. If you want
Assemble, do reverse this process.
When disassembling, make sure the unit turned off.
If you want to assembly, follow the reverse order.