Samsung RB38T675ESA/EK, User Manual

Page: 200 / 466

English 47
Maint
enanc
e
B
A
14. On the top of the freezer door, switch
the position of the grommet (A) and the
grommet cover (B) .
A
15. Fasten the middle hinge (A) to the
opposite side of where it was removed.
- Use a Phillips screwdriver and socket
wrench (10 mm) to fasten the screws.
A
F
C
E
D
B
16. Disassemble the bottom hinge and
reverse all the parts.
a. Use a Phillips screwdriver to remove
the screw (A) fastening the fixer (B)
to the bottom hinge (C) .
b. Use a spanner (10 mm) to remove
the nut (D) and washer (E) fastening
the shaft (F) .
c. Flip the bottom hinge (C) , and then
reattach the shaft (F) with the washer
(E) and the nut (D) .
d. Fasten the fixer (B) with the screw
(A) .
CAUTION
• Be careful not to drop the shaft (F) or
hurt your fingers when removing or
assembling the
shaft (F) .
• Make sure the washer (E) is in the
correct place. If the shaft is fastened
without the
washer (E) , the freezer door
may fall and cause injury.
Untitled-7 47 2021-06-02 2:38:43
200 / 466