Samsung RB195LA, Owner'S Manual

Page: 5 / 24

5
INSTALLING THE FRIDGE / FREEZER
Allow adequate space and install the
fridge/freezer on a firm, level floor.
• If the appliance is not level, there may be
unusual noises and poor cooling.
• Wait for at least one hour before plugging
the appliance in.
Clean the fridge/freezer.
• Wipe and clean the appliance inside and
outside with a damp cloth and dry completely.
Plug the fridge/freezer into a wall
socket used exclusively by this
appliance.
• This appliance must be properly
grounded.
Use of a grounded socket exclusively for the appliance:
• If you are using a socket with a grounded terminal, you do not
require a separate grounding connection.
Use of a non-grounded socket:
• Connect the “grounding wire” to the copper plate and bury
it at a depth of at least 10 inches in the ground.
The appliance must be positioned so that the plug is
accessible after installation.
When installing the refrigerator, you should provide a
clearance of at least 2 inches at the back, top and 1 inch
from the sides of the refrigerator.
If the front of the appliance is slightly higher than the rear, the door can be opened and closed easier.
Place the food in the fridge/freezer.
• It is recommended that you wait for the
appliance to cool for 2-3 hours before
storing food in it.
LEVELLING
The appliance tilts down to the left.
Turn the left adjusting leg in the direction of
the arrow with a flat head screwdriver until
the appliance is level.
The appliance tilts down to the right.
Turn the right adjusting leg in the direction of
the arrow with a flat head screwdriver until
the appliance is level.
10 inch
Warning
Change of the door direction is possible.
• If you want to change the door direction, call 1-800-SAMSUNG.
If you want to connect the refrigerator to your water supply, call 1-800-SAMSUNG.
Note