background image

02 OPERA

TING

operating

 

_9

4.  The water will become the ice cubes within 3-4 

hours. Please remove the ice tray by pulling it out.

 

Never use any kind of instrument.

 

This may cause damage on the freezer.

To take the ice cubes from the ice 

cube tray, you should gently twist 
the ice tray (As shown), Do not 
bend it over.

Freezing time

It is recommended that you wait about 1~2 

hours after setting MAX of temperature control 
for the ice cubes to form.

After unplug the appliance , wait for about 5

minutes before restarting.

Danger of explosion

•   The coldest parts of the refrigerator is 

the rear panel. 
This is the best place to store delicate 
foodstuffs.

•  Glass bottles containing liquids should 

never be stored in the freezer as the 

glass can shatter when the contents 
freeze.

uSING THE WATER DISPENSER 
(MODEL WITH WATER 
DISPENSER ONLY)

If drinking water is needed, push 
the water dispenser lever with a 

glass.

To refill the water thank, remove 
the cap and fill it up with drinking 
water, then keep the cap into 

place.

When you want to clean water 
tank, let water out of the tank. 
Remove 

 away from 

 then 

remove the water tank from the 
locking device by lifting it up.

 

Remove the lid 

 by pulling 

outward straightly. 

Wash it with detergent and warm 
water, then wash with clean water.

 

After drying it with a clean cloth, place it correctly.

STEPS TO OPERATE THE WATER 
DISPENSER

1.  The water tank should be cleaned up firstly before 

use, to remove any dust or oder.

2.  The water tank should be filled up with pure 

drinking water. The water dispenser devices might 
be damaged by the syrup, soft drink or hot water.

3.  If the appliance has just been installed, please let 3 

or 4 glasses of water away to remove the dust and 

plastic smell of the water tank.

4.  To prevent soaking on the floor, you should softly 

push the water dispenser lever with a glass, then 

pull it backward slowly and wait until the last drop 
of water.

5.  The accessories should be removed for cleaning 

up at least once or twice a month.

REMOVING THE INTERIOR PARTS

Refrigerator Shelves

Pull the shelves towards you 

until it meets the stopper. 

Tilt the front of the shelves 

up and continue pulling the 

shelves out.

chiller compartment

Pull the chiller compartment 

towards you until it meets the 
stopper. 
Tilt the front upward 
and continue pulling the 
compartment out.

Vegetable Bin and cover

Pull the vegetable bin towards 

you and out of the refrigerator. 

Lift the cover up and pull it out 

of the refrigerator.

Bottle Storage Guards

Lift straight upwards to 

release the tabs, then pull it 

out of the refrigerator. 
(This bottle storage guard is 

not adjustable; it fits in only 

one position.)

cAuTION

DA68-02477A(0.0)-EN (Paolo-T).indd   9

2010.12.17   10:8:30 AM

Summary of Contents for ra21ptih













Reviews: