background image

16

Parts

Control Panel

Panel Key

Speaker

 

The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve 

quality.

Panel Key

Buttons

Description

Power on the product.

If you press the 

 button when the product is turned on, the control menu will be 

displayed.

 

To exit the OSD menu, press and hold the panel key for at least one second.

Move to the upper or lower menu. You can also adjust the value of an option.

Move to the left or right menu.

 

You can adjust the volume by moving the panel key left or right when the control 

menu is not displayed.

Remote sensor

Press a button on the remote control pointing at the sensor on the front of the 
product to perform the corresponding function.

 

Using other display devices in the same space as the remote control of this 

product can cause the other display devices to be inadvertently controlled.

Use the remote control within 7 m to 10 m from the sensor on the product at an angle of 30  from the left and right.

 

Store used batteries out of reach of children and recycle.

 

Do not use a new and used battery together. Replace both batteries at the same time.

 

Remove batteries when the remote control is not to be used for an extended period of time.

Remote sensor

Summary of Contents for QM105D


























































































































Reviews: