Preventing the TV from falling
1.
Using the appropriate screws, firmly fasten a set of brackets to the
wall. Confirm that the screws are firmly attached to the wall.
–
You may need additional material such as wall anchors
depending on the type of wall.
2.
Using the appropriately sized screws, firmly fasten a set of brackets
to the TV.
–
For the screw specifications, refer to the standard screw part in
the table under "Mounting the TV on a wall".
3.
Connect the brackets fixed to the TV and the brackets fixed to the
wall with a durable, heavy-duty string, and then tie the string tightly.
–
Install the TV near the wall so that it does not fall backwards.
–
Connect the string so that the brackets fixed to the wall are at
the same height as or lower than the brackets fixed to the TV.
• The product colour and shape
may vary depending on the
model.
Installing a sound bar (sold separately)
When you install a sound bar (76 mm or less in height) on the TV stand, attach the RUBBER-FOOTs to the
bottom of the sound bar before mounting the sound bar. Make sure that the RUBBER-FOOTs are not out of the
stand width. Refer to the figure below:
TOP
BOTTOM
English - 12
