Samsung Q35, Owner'S Manual, Page: 137 / 157

7-17
Chapter 7. Recovering the Computer
Wired LAN Related
Q1 <Wake On LAN> Function.
A <Wake On LAN> is a function that activates the system in rest mode when a sig-
nal (such as
ping
or
magic packet
commands) arrives from network(wired
LAN).
▶
To use <Wake On LAN> function
1. Select
My Network Environment > View Network Connections
from the Desktop.
2. Click the right button on the touchpad over
Local Area Connection
, and
select
Properties
.
3. Click Configure... , and select Power Management tab. Select ' Allow
this device to bring the computer out of standby ', then click OK .
Restart the system.
If the system in rest mode is activated when there is no received signal, use the
system after disabling <Wake On LAN> function.
If you turn the power off when <Wake On LAN> is disabled, the LAN LED con-
tinues to be lit up.
Connecting wired LAN while using wireless LAN may not execute <Wake On
LAN> function. Configure wireless LAN to '
Disable
' to use <Wake On LAN>
function.
1. Click on
My Network Place> View network connections
on the Desktop.
2. Right-click over
Wireless Network Connection
and select
Disable
.
Q2 When I connected 100Mbps wired LAN and the computer exits
standby/hibernate mode, a message informing 10Mbps wired
LAN connection appears.
A When the computer exits standby/hibernate mode, restoring the network takes
about 3 seconds. When the network is restored, it operates in 100Mbps.
x11-hk_ch7 2006.1.24 3:32 PM 페이지17 1000 Dolev-2540-Color-S T