English - 12
5
Terms of Service Agreement
When the
Network Settings
is completed, The
Terms of Service Agreement
screen appears.
✎
The screen can take a few seconds to appear.
The
General Disclaimer
screen appears. Select
Agree
. The
Privacy policy
screen appears. Select
Agree
.
✎
To use the
Smart Hub
, you should select
Agree
from the
Terms of Service Agreement
.
6
Select Country.
(Depending on the country)
Select the appropriate country.
✎
After selecting the country in the Country menu, some models may proceed with an
additional option to setup the pin number.
7
Auto Tuning
(1): Selecting how
you watch your TV
Let’s find and store channels on your TV. Do you need to search for channels?
•
Yes, I need to.
: All the channels available will be found and stored on your TV.
•
No, I don’t need to.
: My set-top box provides all the channels that are available, so I don't
need to search for channels.
8
Auto Tuning
(2):
Selecting a search options and
Region Selection
(Depending
on the country)
Select the channel source to memorise. When setting the aerial source to
Cable
, a step appears
allowing you to assign numerical values (channel frequencies) to the channels. For more information,
refer to
Auto Tuning
(Channel Menu
→
Memorizing Channels) in the e-Manual.
✎
When
Air
or
Cable
is selected first: After all
Air
or
Cable
channels are stored, the step for
storing
Satellite
channels is displayed.
✎
When
Satellite
is selected first: After all
Satellite
channels are stored, the step for storing
Air
or
Cable
channels is displayed.
✎
Select
Stop
at any time to interrupt the memorization process.
9
Clock
: Setting the Clock Mode
•
Auto
: Set the current time automatically.
•
Manual
: Allows you to manually set the current date and time.
10
Voice and motion control
:
Setting the Voice and Gesture
Control function.
✎
You can turn the
Voice and motion control
function
On
or
Off
. Select Off or On, and then
select
Next
. For more detailed information, refer to “SMART Interaction” (p.14)
11
Setup
Complete
Select
Close
to finish.
✎
The completed settings are displayed.
If You Want to Reset This Feature...
Menu
→
System
→
Setup
Select
System
-
Setup
(Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”. If you want to change the PIN number, use
the
Change PIN
function.
You should do
Setup
(
Menu
→
System
) again at home although you did in shop.
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to “0-0-0-0”:
MUTE
→
8
→
2
→
4
→
POWER
(on).
[PE8000_ZG-1]BN68_04062B_00L04.indb 12
2012-03-07 9:48:04
