English - 7
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings.
Press the
POWER
P
button.
Plug & Play
is available only when the
Source
is set to TV.
✎
Before turning on the TV, make sure the antenna cable is connected (p. 6).
✎
To return to the previous step, press the Red button.
1
Selecting a language Press the
▲
or
▼
button, then press the
ENTER
E
button.
Select the desired OSD (On Screen Display) language.
2
Selecting
Store
Demo
or
Home Use
Press the
◄
or
►
button, then press the
ENTER
E
button.
Select the
Home Use
mode.
Store Demo
mode is for retail
environments.
To return the unit’s settings from
Store Demo
to
Home Use
(standard): Press the volume button on the TV. When you see the
volume OSD, press and hold
MENU
for 5 sec.
Store Demo
is only for shop display. If you select it, several
functions are not able to use. Please select
Home Use
when you
watch at home.
3
Selecting a country
(depending on the
country)
Press the
▲
or
▼
button, then press the
ENTER
E
button. Select the
appropriate country.
✎
After selecting the country in the
Country
menu, some models may proceed
with an additional option to setup the pin number.
✎
When you input the PIN number, “0-0-0-0” is not available.
4
Setting the
Clock
Mode
Set the
Clock Mode
automatically or manually.
Auto
: Select the time zone where you are located.
Manual
: Allows you to manually set the current date and time.
5
Selecting an antenna Press the
▲
or
▼
button, then press the
ENTER
E
button. Select the Antenna
source to memorise.
6
Selecting a channel
Press the
▲
or
▼
button, then press the
ENTER
E
button. Select the channel
source to memorise. When setting the antenna source to
Cable
, a step appears
allowing you to assign numerical values (channel frequencies) to the channels. For
more information, refer to
Channel
→
Auto Tuning
.
✎
When
Air
or
Cable
is selected first: After all
Air
or
Cable
channels are
stored, the step for storing
Satellite
channels is displayed.
✎
When
Satellite
is selected first: After all
Satellite
channels are stored, the
step for storing
Air
or
Cable
channels is displayed.
✎
Press the
ENTER
E
button at any time to interrupt the memorisation
process.
7
Enjoy your TV.
Press the
ENTER
E
button.
✎
If you select the Networking Settings, set the network. For more information,
refer to “Wired/Wireless Network Connection” in the e-Manual.
If You Want to Reset This Feature...
Select
System
-
Plug & Play
(Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.”
If you want to change the PIN number, use the
Change PIN
function.
You should do
Plug & Play
(
MENU
→
System
) again at home although you did in shop.
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode,
which resets the PIN to “0-0-0-0”:
MUTE
→
8
→
2
→
4
→
POWER
(on).
P
POWER
[PD579-ZG]BN68-03450K-00L02.indb 7
2011-03-04 오후 4:04:30
